Cooling fins are integrated into the cover.
Pole connection: in die-cast aluminium and with gaskets to secure the frame. Suited for poles with a diameter 45-60mm.
Optics: in PMMA, highly resistant to temperature and UV radiation.
Coating: the standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating.
Standard supply: automatic temperature control inside the device with automatic resetting. Safety diode to protect against voltage peaks compliant with EN 61547. With dedicated electronic device to protect the LED module. Complete with quick connection.
Equipment: silicone rubber gasket; external screws and bolts in stainless steel; air recirculation valve. Insulation connector for quick installation with no need to open the fixture.
LED: Power factor ≥0,9.
Luminous flux maintenance 80%:
350mA, L80B10 80.000h
530mA, L80B10 70.000h
700mA, L80B10 60.000h
Photobiological safety class: exempt group EN62471.
Upon request:
– with power supply 1-10 V dimmable with subcode 12.
– with power supply DIG dimmable with subcode 0041.
– with virtual midnight subcode 30.
– power line carrier remote control systems subcode 0078.
– Nema Socket,
subcode 40
– Zhaga Socket, subcode 0054
Regulations:Produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards.
Wind surface: L:326cm² F:659cm².
Registered Design DM/100271

Show less...