Proizvodi
Disano 1783 Astro HE – high efficiency
Tehnički opisi:
PDF: technicalsheet
Lights with great aesthetic quality, superior energy-efficiency and long life: in order to obtain the best from the new lighting technology, lighting systems need the technical requirements and the reliability of state-of-the-art fixtures, such as the ones designed by Disano, a company with over fifty years of experience in the lighting sector.
Astro was created to meet these criteria and is available in three different versions: for interiors, centre-road application and as a spotlight.
Astro was created to meet these criteria and is available in three different versions: for interiors, centre-road application and as a spotlight.
Show more...
Simple and linear aesthetics combines with a sophisticated technology to offer exceptional technical performance: Astro was designed to take the best from all the potential of the new LED lights.
Quality materials and the fixture’s high reliability, as always guaranteed by Disano, are a safe investment.
The product offers the possibility to choose the correct drive current for LEDs and have the right power under specific design conditions
Housing: in die-cast aluminium with cooling fins integrated into the cover.
Diffuser: tempered glass, 4 mm thick, resistant to thermal shocks and impacts (UNI-EN 12150-1: 2001).
Coating: the standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating.
Standard supply: device for automatic temperature control. Electronic safety device to protect the LED module and the related ballast compliant with EN 61547.
It works in two modes:
– differential mode: surge between power cables and between the phase and neutral.
– common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole.
Upon request: for Class II fixtures, protection up to 10KV. Coating compliant with UNI EN ISO 9227 Corrosion tests in artificial atmospheres for aggressive environments.
Heat sink: the heat dissipation system is specially designed and made to allow the operation of the LED lights with temperatures below 50° (Tj = 85°), thus guaranteeing excellent performance/efficiency and durability.
The possibility to choose the correct drive current for LEDs. Using a lower current will improve the efficiency of fixtures and therefore increase energy saving.
Optics: in PMMA, highly resistant to temperature and UV radiation
LED: Latest generation LED technology, Ta-30 + 35°C life 90%: 50000h (L90B10).
Photobiological safety class: exempt group EN62471.
Upon request:
– with power supply DIG dimmable with subcode 0041.
– with virtual midnight subcode 30.
– power line carrier remote control systems subcode 0078.
Wind surface:
ø462 : L=551cm
2
– F1715cm
2
ø512 : L=607cm
2
– F=2100cm
2
Quality materials and the fixture’s high reliability, as always guaranteed by Disano, are a safe investment.
The product offers the possibility to choose the correct drive current for LEDs and have the right power under specific design conditions
Housing: in die-cast aluminium with cooling fins integrated into the cover.
Diffuser: tempered glass, 4 mm thick, resistant to thermal shocks and impacts (UNI-EN 12150-1: 2001).
Coating: the standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating.
Standard supply: device for automatic temperature control. Electronic safety device to protect the LED module and the related ballast compliant with EN 61547.
It works in two modes:
– differential mode: surge between power cables and between the phase and neutral.
– common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole.
Upon request: for Class II fixtures, protection up to 10KV. Coating compliant with UNI EN ISO 9227 Corrosion tests in artificial atmospheres for aggressive environments.
Heat sink: the heat dissipation system is specially designed and made to allow the operation of the LED lights with temperatures below 50° (Tj = 85°), thus guaranteeing excellent performance/efficiency and durability.
The possibility to choose the correct drive current for LEDs. Using a lower current will improve the efficiency of fixtures and therefore increase energy saving.
Optics: in PMMA, highly resistant to temperature and UV radiation
LED: Latest generation LED technology, Ta-30 + 35°C life 90%: 50000h (L90B10).
Photobiological safety class: exempt group EN62471.
Upon request:
– with power supply DIG dimmable with subcode 0041.
– with virtual midnight subcode 30.
– power line carrier remote control systems subcode 0078.
Wind surface:
ø462 : L=551cm
2
– F1715cm
2
ø512 : L=607cm
2
– F=2100cm
2
Show less...
| Code | Gear | Kg | Lumen Output-K-CRI | WTot | Colour |
| 320010-00 | CLD CELL | 10.34 | LED 18135lm-4000K-60°-CRI 80 | 124W | 4kV |
| 320011-00 | CLD CELL | 10.34 | LED 22236lm-4000K-60°-CRI 80 | 151W | 4kV |
| 320012-00 | CLD CELL | 11.77 | LED 27488lm-4000K-60°-CRI 80 | 195W | 4/6kV |
| 320014-00 | CLD CELL | 11.83 | LED 26159lm-4000K-30°-CRI 80 | 195W | 4/6kV |
| 320015-00 | CLD CELL | 11.79 | LED 27120lm-4000K-90°-CRI 80 | 195W | 4/6kV |
KONTAKTIRAJTE NAS:
