Moreover special guide grooves guarantee perfect alignment of the fixtures in a continuous row.  These characteristics are supported by all the benefits of LED technology, i.e. light sources with a very long life (80,000 hours), low consumption and high light quality. White-light LEDs guarantee a more pleasant light and greater colour rendering compared to old yellow-light sodium vapour lamps.
HOUSING: Injection moulded, in RAL 7035 grey polycarbonate, vandal resistant, UV stabilized, high mechanical resistance due to the frame reinforced by internal ribbing.
DIFFUSER: Injection moulded, in V2 self-extinguishing polycarbonate, UV stabilized, clear polycarbonate, prismatic inside for better light control and high lighting performance. The external smooth finish facilitates cleaning, essential to maintain maximum lighting efficiency.
EQUIPMENT: plug connector.
REGULATIONS: Produced according to applicable EN60598-1  CEI34-21 standards, degree of protection IP66IK08 according to EN60529. Can be installed on normally inflammable surfaces.Glow wire tested at 850°C.
life 80.000h to 80% L80B20
Photobiological safety class: exempt group EN62471.
On request: High performance version, dimmable, Narrow beam version (Sub 22)
Order 371/372 accessories to complete the continuous lines.
RADAR SENSOR (subcode -19): an electronic device that immediately detects any presence entering its range. When the sensor reads movement inside its range, lights will stay on. When it no longer detects movement within its range, lights will turn off after a pre-set time.
THE POLYCARBONATE WATER-PROOF LIGHTING fittings have a level of water protection rated at IP66IK08 if installed in environments with temperatures that do not exceed 45°C.  Direct exposure to sunlight causes the temperature to readily exceed 45°C, compromising the degree of protection IP66IK08. The lighting fittings must be used appropriately without changing the mechanical and protection features and must not be installed on surfaces subject to strong vibrations, outdoors on cables or poles.ù
RADAR SENSOR ON-OFF – FEATURES AND connections
• High-frequency motion detector for invisible light switching, especially suited for use in lighting fixtures.
• 360° detection angle.
• Detection range, twilight value and additional activation time may be set with a potentiometer.
• HF technology: 5.8GHz, it reacts to very small movements, regardless of temperature; it also sees through walls.
• Extremely short activation time.
• Light only when needed.
RADAR SENSOR DIMM 1-10V – FEATURES AND connections
• High-frequency motion detector with dimmer for invisible light switching, especially suited for use in lighting fixtures.
• Dimmable ballast with 1-10V interface.
• Inputs for multiple devices to cover a larger detection area (see rated load).
• Detection range, twilight value and additional activation time may be set with a potentiometer.
• HF technology: 5.8GHz, it reacts to very small movements, regardless of temperature; it also sees through walls.
This lighting fixture meets the global standards of the International Food Safety (IFS), the British Retail Consortium (BRC) and the HACCP Directive regarding the safety of the lighting systems in the food industry.
In any case, it will be necessary to contact appointed designers and
Disano
’s consultancy office to check the compatibility of materials with the food products processed and in all industrial environments where sanitizing systems are installed.

Show less...