Proizvodi
Disano 3384 Como 2 – asymmetric
Tehnički opisi:
PDF: technicalsheet
Housing and arms: pressed in die-cast aluminium and designed with a very small surface exposed to wind.
Optics: optics made of PMMA with high temperature resistance and UV rays.
Pole connection: pressed in die-cast aluminium. Suited for poles with a diameter 60-76mm.
Diffuser: extra-clear tempered glass, 4 mm thick, resistant to thermal shocks and impacts (UNI-EN 12150-1: 2001).
Coating: the standard liquid immersion coating consists of a first metal surface pre-treatment stage, a successive epoxy cataphoresis corrosion and salt resistant coating, and a final layer of bi-component acrylic liquid UV-stabilised coating.
Optics: optics made of PMMA with high temperature resistance and UV rays.
Pole connection: pressed in die-cast aluminium. Suited for poles with a diameter 60-76mm.
Diffuser: extra-clear tempered glass, 4 mm thick, resistant to thermal shocks and impacts (UNI-EN 12150-1: 2001).
Coating: the standard liquid immersion coating consists of a first metal surface pre-treatment stage, a successive epoxy cataphoresis corrosion and salt resistant coating, and a final layer of bi-component acrylic liquid UV-stabilised coating.
Show more...
Equipment: nylon wiring plate 30% fibre glass complete with connector for mains connection and for LED module. Automatic temperature control inside the device with automatic resetting. With dedicated electronic device to protect the LED module. Equipped with an air-circulation valve.
Energy-saving: the possibility to choose the correct drive current for LEDs will allow you to have the right power under specific design conditions, and also help you deal with maintenance and retrofitting problems. Using a lower current will improve the efficiency of fixtures and therefore increase energy savings, whilst a higher current will result in a higher light flux so that you can reduce the number of fixtures.
Regulations: produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards.
LED: Power factor >= 0.9.
Luminous flux maintenance 80%: 80.000h (L80B20)
Surface exposed to wind: 769 cm2.
Upon request:
– Coating compliant with UNI EN ISO 9227 Corrosion tests in artificial atmospheres for aggressive environments.
– with power supply 1-10 V dimmable with subcode 12.
– with virtual midnight subcode 30.
– power line carrier remote control systems subcode 0078.
– possibility to control each individual light point
– Nema Socket, subcode 40
– Zhaga Socket, subcode 0054
Energy-saving: the possibility to choose the correct drive current for LEDs will allow you to have the right power under specific design conditions, and also help you deal with maintenance and retrofitting problems. Using a lower current will improve the efficiency of fixtures and therefore increase energy savings, whilst a higher current will result in a higher light flux so that you can reduce the number of fixtures.
Regulations: produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards.
LED: Power factor >= 0.9.
Luminous flux maintenance 80%: 80.000h (L80B20)
Surface exposed to wind: 769 cm2.
Upon request:
– Coating compliant with UNI EN ISO 9227 Corrosion tests in artificial atmospheres for aggressive environments.
– with power supply 1-10 V dimmable with subcode 12.
– with virtual midnight subcode 30.
– power line carrier remote control systems subcode 0078.
– possibility to control each individual light point
– Nema Socket, subcode 40
– Zhaga Socket, subcode 0054
Show less...
| Code | Gear | Kg | Lumen Output-K-CRI | WTot | Colour |
| 340560-00 | CLD CELL | 5.54 | LED 1034lm-4000K-CRI 70 | 9W | ANTHRACITE |
| 340560-39 | CLD CELL | 5.16 | LED 961lm-3000K-CRI 70 | 9W | ANTHRACITE |
| 340561-00 | CLD CELL | 5.11 | LED 3068lm-4000K-CRI 70 | 26W | ANTHRACITE |
| 340561-39 | CLD CELL | 5.16 | LED 2853lm-3000K-CRI 70 | 26W | ANTHRACITE |
KONTAKTIRAJTE NAS:
