Equipment: nylon wiring plate 30% fibre glass complete with connector for mains connection and for LED module. Automatic temperature control inside the device with automatic resetting. With dedicated electronic device to protect the LED module. Equipped with an air-circulation valve.
Energy-saving: the possibility to choose the correct drive current for LEDs will allow you to have the right power under specific design conditions, and also help you deal with maintenance and retrofitting problems. Using a lower current will improve the efficiency of fixtures and therefore increase energy savings, whilst a higher current will result in a higher light flux so that you can reduce the number of fixtures.
Regulations: produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards.
LED: Power factor >= 0.9.
Luminous flux maintenance 80%: >100.000h (L80B10).
Surface exposed to wind: 769 cm2.
Upon request:
– Coating compliant with UNI EN ISO 9227 Corrosion tests in artificial atmospheres for aggressive environments.
– with power supply 1-10 V dimmable with subcode 12.
– with virtual midnight subcode 30.
– power line carrier remote control systems subcode 0078.
– possibility to control each individual light point
– Nema Socket, subcode 40
– Zhaga Socket, subcode 0054

Show less...