Inclination pace: 5°. Suited for poles with a diameter 42-76.
Diffuser: extra-clear, tempered glass, 4 mm thick, resistant to thermal shock and impacts (UNI-EN12150-1: 2001).
Coating: Coating: the standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating.
The SELLA luminaire is declared to have passed the 2000 hours of salt corrosion resistance test in accordance with ASTM B 117 standard and the 2000 hours of UV condensation test in accordance with the ASTM G 154 standard.
Standard supply:  double insulation switch that cuts off electricity when the cover is opened.  Electronic safety device to protect the LED module and the related ballast compliant with EN 61547. External connector for quick installation.
It works in two modes:
– differential mode: surge between power cables and between the phase and neutral.
– common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole.
Upon request:  protection up to 10KV. Coating compliant with UNI EN ISO 9227 Corrosion tests in artificial atmospheres for aggressive environments.
LED: Power factor: =0.92
maintenance of luminous flux at 80%: 80.000 (L80B10).
Available upon request:
– 1-10V dimmer: 10%-100% dimming with 1-10V device, to be ordered with subcode -12.
– Virtual midnight: stand-alone device with automatic flux reduction, to be ordered with subcode -30.
– Power line carrier: point-to-point diagnosis and control management system, to be ordered with subcode -0078.
– Wi-Fi remote control (to be agreed upon): point-to-point control and diagnosis system of the entire system with Wi-Fi technology.
– Nema Socket, subcode 40
– Zhaga Socket, subcode 0054
Wind surface: 1750cm².
The products of the Sella family are compliant with all applicable tests (third-party certification) pursuant to standard ANSI C136.31: Street Lighting – Luminaire Vibration.
– Test level: 3.0G Level 2 for bridge/overpass applications.
Registered Design DM/100271

Show less...