Suited for poles with a diameter of 46-76mm.
Diffuser: clear, tempered glass, 4 mm thick, resistant to thermal shock and impacts (UNI-EN 12150-1 : 2001)
Coating: the standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating.
Standard supply: automatic temperature control device. In the event of an unexpected LED temperature rise caused by particular weather conditions or a LED failure, the system will reduce the luminous flux to lower the working temperature and guarantee proper operation. Safety diode to protect against voltage peaks.
Equipment: complete with IP67 airtight connector for mains connection.
Heat sink: the heat dissipation system is specially designed and made to allow the operation of the LED lights with temperatures below 50° (Tj = 25°), thus guaranteeing excellent performance/efficiency and durability.
LED: Latest generation LED technology, Ta -30 + 40°C life >100.000h to 80% L80B10
Photobiological safety class: exempt group EN62471.
Power factor >0.9
Regulations:Produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards.
Upon request:
– with power supply 1-10 V dimmable with subcode 12.
– with power supply DIG dimmable with subcode 0041.
– with virtual midnight subcode 30.
– power line carrier remote control systems subcode 0078.
– Nema Socket,
subcode 40
– Zhaga Socket, subcode 0054
Wind surface: L:548cm² S:1431cm².
Contact the Consulting and design Centre for any lighting information.

Show less...