Proizvodi

Disano 3269 Mini Stelvio FX T5 – light scattering


Tehnički opisi:
PDF:
technicalsheet


Housing and cover: in die-cast aluminium and designed with a very small surface exposed to wind. Cooling fins are integrated into the cover.
Pole connection: in die-cast aluminium and with gaskets to secure the frame according to different inclinations. Adjustable ranges: between 0° and 15° for side mount; and between 0° and 10° for mast-top mounting. Inclination pace: 5°. Suited for poles with a diameter 63-60mm
Diffuser: clear, tempered glass, 4 mm thick, resistant to thermal shock and impacts (UNI-EN 12150-1 : 2001)
Coating: the standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating.

Show more...

Standard supply: Automatic temperature control inside the device with automatic resetting.  Electronic safety device to protect the LED module and the related ballast compliant with EN 61547.
It works in two modes:
– differential mode: surge between power cables and between the phase and neutral.
– common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole.
Upon request: protection up to 10KV.
Equipment: complete with IP67 airtight connector for mains connection. Supplied with double insulation switch that cuts off electricity when the cover is opened.
Energy-saving: the possibility to choose the correct drive current for LEDs will allow you to have the right power under specific design conditions, and also help you deal with maintenance and retrofitting problems. Using a lower current will improve the efficiency of fixtures and therefore increase energy savings, whilst a higher current will result in a higher light flux so that you can reduce the number of fixtures.
Optics: in PMMA, highly resistant to temperature and UV radiation.
LED: Ta-30+40°C life 80%: >100.000h (L80B10).
Power factor >0.9
Regulations:Produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards.
Upon request:
– with power supply 1-10 V dimmable with subcode 12.
– with power supply DIG dimmable with subcode 0041.
– with virtual midnight subcode 30.
– power line carrier remote control systems subcode 0078.
– Nema Socket,
subcode 40
– Zhaga Socket, subcode 0054
– Coating compliant with UNI EN ISO 9227 Corrosion tests in artificial atmospheres for aggressive environments.
Wind surface: L:139cm² F:400cm².

Show less...

 


CodeGearKgLumen Output-K-CRIWTotColour
330460-00CLD CELL8.66LED 4510lm-700mA-4000K-CRI>7034W6/10kV
330461-00CLD CELL8.62LED 8910lm-700mA-4000K-CRI>7067W6/8kV
330463-00CLD CELL7.96LED 13366lm-700mA-4000K-CRI>70100W6/8kV
330467-00CLD CELL8.38LED 2392lm-350mA-4000K-CRI>7017W6/10kV
330468-00CLD CELL8.28LED 4727lm-350mA-4000K-CRI>7032W6/8kV
330469-00CLD CELL8.46LED 7091lm-350mA-4000K-CRI>7049W6/8kV
330464-00CLD CELL7.44LED 3563lm-530mA-4000K-CRI>7025W6/10kV
330465-00CLD CELL7.98LED 7039lm-530mA-4000K-CRI>7050W6/8kV
330466-00CLD CELL8.62LED 10559lm-530mA-4000K-CRI>7074W6/8kV
330460-39CLD CELL7.9LED 4284lm-700mA-3000K-CRI>7034W6/10kV
330461-39CLD CELL8LED 8464lm-700mA-3000K-CRI>7067W6/8kV
330463-39CLD CELL7.96LED 12698lm-700mA-3000K-CRI>70100W6/8kV
330467-39CLD CELL7.56LED 2273lm-350mA-3000K-CRI>7017W6/10kV
330468-39CLD CELL8.3LED 4490lm-350mA-3000K-CRI>7032W6/8kV
330469-39CLD CELL8.5LED 6736lm-350mA-3000K-CRI>7049W6/8kV
330464-39CLD CELL7.5LED 3384lm-530mA-3000K-CRI>7025W6/10kV
330465-39CLD CELL8LED 6687lm-530mA-3000K-CRI>7050W6/8kV
330466-39CLD CELL8.6LED 10031lm-530mA-3000K-CRI 7074W6/8kV

 

KONTAKTIRAJTE NAS:

     

    Kategorija: