Simple and linear aesthetics combines with a sophisticated technology to offer exceptional technical performance: Astro was designed to take the best from all the potential of the new high-performance LED lights.
Quality materials and the fixture’s high reliability, as always guaranteed by Disano, are a safe investment.
The product offers the possibility to choose the correct drive current for LEDs and have the right power under specific design conditions
Housing: in die-cast aluminium with cooling fins integrated into the cover.
Diffuser: Injection moulded, in V2 self-extinguishing, UV stabilized, clear polycarbonate, ideal for the food industry.
Coating: the standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating.
Standard supply: device for automatic temperature control. In the event of an unexpected temperature rise caused by particular weather conditions, the system will reduce the luminous flux to lower the working temperature and guarantee proper operation.  Electronic safety device to protect the LED module and the related ballast compliant with EN 61547.
It works in two modes:
– differential mode: surge between power cables and between the phase and neutral.
– common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole.
Upon request:  for Class II fixtures, protection up to 10KV.
Equipment: complete with watertight IP68 connecter for line connection. Anti-condensation valve for air recirculation.
Heat sink: the heat dissipation system is specially designed and made to allow the operation of the LED lights with temperatures below 50° (Tj = 85°), thus guaranteeing excellent performance/efficiency and durability.
The possibility to choose the correct drive current for LEDs. Using a lower current will improve the efficiency of fixtures and therefore increase energy saving.
Optics: polycarbonate with micro-faceted finish. LEDs with lens combined with flux recovery system.
Photobiological safety class: exempt group EN62471.
Emergency version: 1h, acc. 1175 to be purchased separately
Upon request:
– With power supply DIG dimmable with subcode 0041.
– Emergency wiring with centralized power supply CLD CELL-EC (sub-code -0050).
It is also available with sensors
Luminous flux maintenance
330156-00 / 330157-00: 90% – 100.000h – (L90B10) – Ta = -40°C ÷ +45°
330150-00 / 330153-00: 90% – 100.000h – (L90B10) – Ta = -40°C ÷ +45°
330151-00 / 330154-00: 90% – 100.000h – (L90B10) – Ta = -40°C ÷ +40°
330152-00 / 330155-00: 90% – 100.000h – (L90B10) – Ta = -40°C ÷ +40°
(request in head office for higher Ta…)
This lighting fixture meets the global standards of the International Food Safety (IFS), the British Retail Consortium (BRC) and the HACCP Directive regarding the safety of the lighting systems in the food industry.
In any case, it will be necessary to contact appointed designers and
Disano
’s consultancy office to check the compatibility of materials with the food products processed and in all industrial environments where sanitizing systems are installed.

Show less...