Show more...
Housing/Chassis: in die-cast aluminium with cooling fins.
Diffuser: in tempered glass, 4 mm thick, resistant to thermal shocks and impacts.
Optics: combined optical system made in high performance PMMA, resistant to high temperatures and UV radiation. Flux recovery system in polycarbonate.
Coating: the standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating.
On request: coating compliant with UNI EN ISO 9227 Corrosion tests in artificial atmospheres for aggressive environments.
Equipment: complete with zinc coated bracket and power cable.Electronic safety device to protect the LED module and the related ballast compliant with EN 61547.
Surge protection 1/2kV
It works in two modes:
– differential mode: surge between power cables and between the phase and neutral.
– common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole.
Upon request: 1-10V dimmer, for 0 to 100% dimming.
Standards: manufactured pursuant to EN 60598-1-CEI 34.21 and with a degree of protection pursuant to EN 60529. Suitable for installation on normally inflammable surfaces.
Photobiological risk: exempt, pursuant to EN62471.
Power factor: >= 0.92
80% luminous flux maintenance at 80%: 90.000h (L80B20)
Wind surface: L:135cm² F:286cm².
Show less...